THOR200-X11-I2

THOR200-X11-I2
THOR200-X11-I2

2U Half Military High Performance Computer

  • Intel® Tiger Lake-H i7-11850HE Processors (up to 8 cores)
  • NVidia RTX A2000 (3328 CUDA)
  • Up to 64GB DDR4 SO-DIMM
  • Dual CH 3G-SDI support 1080p60 H.264 H/W Encode
  • 1 x Swappable SSD Tray
  • Compliant with MIL-STD-810
  • 18V~36V MIL-STD-461/MIL-STD-1275
  • Extreme Temperature : -40 ~+60 degree
Download
Datasheet
Get A Quote
  • Technical Profile
  • Specifications
  • Order Information
  • Download
Appearance
THOR200-X11-I2_Appearance

 

Block Diagram
Block Diagram

 

 

System
Processor

Intel® Core™ i7-11850HE, 2.6(4.7) GHz, 24MB, 45W, 8C/16T
Memory type Up to 64GB DDR4 SO-DIMM
Chioset Intel® QM580E

Graphic

Embedded NVIDIA® RTX™ A2000

- Ampere Architecture

- 2560 CUDA® cores, 20 RT Cores, and 80 Tensor Cores

- 4GB GDDR6 memory, 128-bit
TPM Chipset: Infineon, Type:TPM 2.0
BIOS AMI UEFI BIOS

USB

4 x USB 3.0

Ethernet

 2 x 10/100/1000 Ethernet Ports

(1 X LAN form mini-PCIE LAN module card)
3G-SDI Dual CH 3G-SDI support 1080p60 H.264 H/W Encode

Power Type

18V ~ 36V DC IN

MIL-STD 461 EMI DC Module

Storage

1 x2.5” SATA SSD (1 x Swappable SSD Tray)

COM Port

1 x RS232/422/485 (function select by jumper)

Operating Temperature

-40 to +60°C

Dimension

220mm(W) x 350mm(L)x88mm(H) 
Front I/O

LAN(GbE)

2
USB 3.0 4
DP 2
AUDIO 1 x Line-in/1 x Mic-out
COM 1 x RS232/422/485
Power Button 1 x W/LED
SSD LED 1
DC-IN 1 x D38999 Connector
3G-SDI Dual CH BNC Connector
SSD Tray 1 x Swappable SSD
Environmental

MIL-STD-810 Test

Method 500.5, Procedures I and II (Altitude, Operation):

12,192M, (40,000 ft) for the initial cabin altitude (18.8Kpa or 2.73 Psia)

Method 500.5, Procedures III and IV (Altitude, Non-Operation):

15,240, (50,000 ft) for the initial cabin altitude (14.9Kpa or 2.16 Psia)

Method 501.5, Procedure I (Storage/High Temperature)

Method 501.5, Procedure II (Operation/High Temperature)

Method 502.5, Procedure I (Storage/Low Temperature)

Method 502.5, Procedure II (Operation/Low Temperature)

Method 503.5, Procedure I (Temperature shock)

Method 507.5, Procedure II (Temperature & Humidity)

Method 509.7 Salt Spray (50±5)g/L

Method 514.6, Vibration Category 24/Non-Operating (Category 20 & 24,Vibration)

Method 514.6, Vibration Category 20/Operating (Category 20 & 24,Vibration)

Method 516.6, Shock-Procedure V Non-Operating (Mechanical Shock)

Method 516.6, Shock-Procedure I Operating (Mechanical Shock)
Reliability

No Moving Parts; Passive Cooling.

Designed & Manufactured using ISO 9001 Certified Quality Program.
MIL-STD-461

CE102 basic curve, 10kHz - 30 MHz

CS101, 30 Hz~150 kHz

CS114, 10 kHz~200 MHz

CS115,50v/m

CS116,50v/m

RE102 2 MHz -2MHz to 18GHz

RS103 2Mhz to 18GHz

EN 61000-4-2: Air discharge: 8 kV, Contact discharge: 6kV

EN 61000-4-3: 10V/m

EN 61000-4-4: Signal and DC-Net: 1 kV

EN 61000-4-5: Leads vs. ground potential 1kV, Signal und DC-Net: 0.5 kV

CE and FCC
MIL-STD-1275

Steady State –25V~30V,

Surge Low – 15V/500ms,

Surge High – 100V/500ms

Spikes Low  -250/70uS

Spikes High +250/70uS
Operating Temp. -40°C to +60°C (ambient with air flow)
Storage Temp. -40°C to +85°C
Relative Humidity 5% to 95%, non-condensing
THOR200-X11-I2_Ordering Information_20230718